Cart 0
MAH 485

RailMAB 960

Petrol driven rail drilling machine

Technical Specs

360° 360°
Core drill short 30 mm
17 - 36 mm
Core dril long 55 mm
----
Core drill extra-long 110 mm
----
Thread cutting
----
Countersinking
----
Reaming
----
Twist drilling
----
Friction clutch
----
Permanent internal lubrication
Yes
Speed range 1
min.150 - max. 225 min-1
Speed range 2
----
Speed range 3
----
Speed range 4
----
Morse taper
----
Quick change drill chuck-system
----
Industrial arbor
----
Direct arbor
19mm Weldon (3/4")
Weight
21.5 kg
Magnet Size
----
Stroke
40 mm
Voltage
Petrol Engine HONDA GXH 50
Motor Output
1500 Watt
Swivel Base
----
Carbon brush wear control
----
CW/CCW rotation
----
Overheating protection
----
Magnet indicator
----
Full wave control electronics
----
Torque Control
----

Independent of electric power supply at the railway. In the rail processing sector, BDS offers two new and completely redeveloped rail drilling machines: The RailMAB 925 with 1,600 Watt motor and 2-stage oil bath gearbox and the RailMAB 960 core drilling machine with petrol engine. The rail drilling rail drilling machine specialists. The RailMAB 925 and RailMAB 960 are special rail drilling machine used in track construction and signaling, for example to drill grounding screws, contact systems and insulated joints. RailMAB 960 is an electricity-independent rail drilling machine equipped with a robust HONDA motor. Its performance reaches 1.5 kW at a torque of 3.04 Nm. Both systems are easily fixed to the rails with a rapid clamping system. In order to ensure the necessary drilling stability, this carries a pressure of 1.2 t on the rail base. The multitude of optionally available drill adapters greatly increases the flexibility and the ease of use of the two core drilling machines. These adapters automatically determine the height and distance of the core drilling. The track construction rail drilling machine range is topped off with the BDS special drills of the carbide RAIL series which have a cutting depth of 30 mm and a diameter of 16 mm to 36 mm.

Petrol engine 49.4 ccm, 1.5 kw

Core drilling up to Ø 35 mm

Quick-action clamping system

1 High-pressure tank, 5 litres

1 Rail adapter of your choice (no special version)

1 Offset screwdriver SW 4 + 5

1 Operating manual

ZAP 200

19 mm Adapter

Moreinfo

ZAF 002

Internal Thread Adapter

Moreinfo

ZAF 003

Weldon to Quick-In Adapter

Moreinfo

ZAP 300

Core Drill Extension

Moreinfo

ZAF 005

One-Touch to Weldon Adapter

Moreinfo

ZAF 004

Quick-In to Weldon Adapter

Moreinfo

POW 100

PowerWORKER

Moreinfo

ZHS 006

High-performance cutting oil 5000

Moreinfo

ZHS 400

High-performance lubrication spray 5200

Moreinfo

ZHS 550

High-performance cutting paste 5500

Moreinfo

ZHB 001

Cooling lubricant concentrate 6000

Moreinfo

ZSR 100

Spray cleanser 1000

Moreinfo

Site map